Downhole tools and field equipment operate where standard magnets give up: temperatures beyond 150°C, extreme pressure, corrosive media and zero tolerance for failure. We engineer SmCo and high-coercivity NdFeB solutions for magnetic couplings, fishing tools and sensor assemblies that keep operating in the world's harshest environments.
The environments that destroy ordinary magnets — and the engineering required to survive them.
Standard NdFeB loses coercivity fast above 80–120°C. Downhole temperatures of 150–200°C+ cause irreversible demagnetization — and a failed tool at depth costs far more than the magnet.
Drilling fluids, brine and sour gas attack coatings and substrates. Corrosion doesn't just degrade the magnet — it can contaminate the tool and compromise the whole assembly.
Extreme hydrostatic pressure, shock and vibration during drilling operations punish brittle magnetic materials and weak assembly designs. Retention and housing engineering are as critical as the magnet itself.
A magnetic failure downhole means pulling the string. The cost of retrieval dwarfs any saving from an under-specified magnet — reliability engineering is the only economics that matter here.
Application-first engineering — we start from your operating conditions, not our catalog.
SmCo 2:17 for continuous service up to 300–350°C, and high-coercivity NdFeB (EH/AH series) where 180–230°C operation with higher energy product is required. Selected against your actual temperature profile, not a datasheet nominal.
Coating and encapsulation strategies for brine, chemical and H₂S exposure — including hermetic sealing of magnets within stainless or alloy housings for the harshest service.
We deliver magnet + housing sub-assemblies with mechanical retention, not loose magnets. Press-fit, adhesive and sleeve designs engineered for shock, pressure and thermal cycling.
Thermal aging and flux measurement verify performance margin before your tool goes in the hole — with test records you can keep on file.
Four application families account for most of the projects we see — all built on high-temperature materials, corrosion-resistant protection and custom engineering support.
High-force retrieval magnets and fishing assemblies for recovering dropped tools, debris and ferrous objects from wellbores — engineered for impact, temperature and repeated trips in and out of the hole.
Magnetizer sections and magnet assemblies for magnetic flux leakage pipeline inspection pigs — stable field strength and precise geometry decide signal quality, and both are verified before shipment. See MFL magnetic solutions →
Magnets and sub-assemblies for MWD/LWD instruments, sensors and downhole tools — SmCo and EH/AH-series NdFeB in sealed housings, rated for the actual temperature and medium at depth.
SmCo 2:17 for continuous 300–350°C service and high-coercivity NdFeB up to 230°C — for couplings, pumps and rotating equipment where standard grades demagnetize.
Everything below can be customized to your drawings and specifications.
Related products: Permanent Magnetic Materials · Magnetic Assemblies
You don't need a perfect specification to start. Send what you have — our engineers will fill the gaps with you.
Drawings or sketches — dimensions, tolerances, assembly context
Operating conditions — temperature, medium, vibration, duty cycle
Magnetic targets — grade, flux, holding force, or the problem to solve
Quantities — prototype, pilot run, or annual volume estimate
Compliance needs — RoHS/REACH, inspection reports, documentation level
Timeline — target dates for samples and production
Send your operating temperature, medium and assembly requirements — we respond within 24 hours.
Request a Technical Discussion → info@xakmag.com